Sensorwell

ABPDANN005PG2A3

Basic ABP Series, Compensated/Amplified, gage, DIP AN: single axial barbed port, dry gases only, no diagnostics, 0 psi to 5 psi, digital I²C address: 0x28, no temperature output, no sleep mode, 3.3 Vdc

The ABP Series are piezoresistive silicon pressure sensors offering a ratiometric analog or digital output for reading
pressure over the specified full scale pressure span and temperature range. They are calibrated and temperature
compensated for sensor offset, sensitivity, temperature effects and accuracy errors (which include non-linearity,
repeatability and hysteresis) using an on-board Application Specific Integrated Circuit (ASIC). Calibrated output
values for pressure are updated at approximately 1 kHz for analog and 2 kHz for digital. All products are designed and
manufactured according to ISO 9001 standards.

• Dry gases option: The input port is limited to non-corrosive, non-ionic media (e.g., dry air, gases) and should not be
  exposed to condensation. The gases are limited to media compatible with high temperature polyamide, silicone,
  alumina ceramic, silicon, gold, and glass.
• Liquid media option: Includes an additional silicone-based
  gel coating to protect the electronics under port P1, which
  enables use with non-corrosive liquids (e.g. water and
  saline) and in applications where condensation can occur.
  Since port P2 is designed for use with non-corrosive liquids,
  this option is often suitable for wet-wet differential sensing.

Value to Customers

• Simplifies design-in: Small size saves room on the PC board
  (PCB), or simplifies design in smaller and lower power
  devices. Meets Moisture Sensitivity Level 1 requirements,
  which allows for unlimited shelf life when stored at
  <30 ºC/85 %RH and, under most storage conditions, allows
  for PCB soldering without any material concern about solder
  joint quality due to aging of the sensor terminals, which
  minimizes the concern about aging of the terminals prior
  PCB assembly. Pressure choices allow engineers to select
  range required for their application. Leadless SMT, SMT, and
  DIP package options.

• Cost-effective: Small size helps engineers reduce design
  and manufacturing costs while maintaining enhanced
  performance and reliability of the systems they design.
• Accurate: Total Error Band (TEB) and wide pressure range
  enable engineers to optimize system performance by
  improving resolution and system accuracy. Optional internal
  diagnostics validate that the sensor readings are correct.
• Flexible: Supply voltage range, variety of pressure units,
  types, and ranges, output options, and wide operating
  temperature range simplify use in the application.
• Versatile: Wet-media compatibility, sleep mode, and
  temperature output options make the sensor a versatile
  choice for Internet of Things applications.
• Honeywell Brand: Utilize proprietary Honeywell technology,
  and are protected by multiple global patents.

Differentiation:

• Enhanced accuracy helps the design engineer fully understand the error in measurement.
• Wide supply voltage range offers design flexibility.
• Power consumption when utilizing sleep mode option allows for use in battery-powered applications.