Basic ABP Series, Compensated/Amplified, gage, SMT AN: single axial barbed port, dry gases only, diagnostics on, 0 psi to 1 psi, digital I²C address: 0x28, no temperature output, no sleep mode, 3 .3 Vdc

    The ABP Series are piezoresistive silicon pressure sensors offering a ratiometric analog or digital output for reading
    pressure over the specified full scale pressure span and temperature range. They are calibrated and temperature
    compensated for sensor offset, sensitivity, temperature effects and accuracy errors (which include non-linearity,
    repeatability and hysteresis) using an on-board Application Specific Integrated Circuit (ASIC). Calibrated output
    values for pressure are updated at approximately 1 kHz for analog and 2 kHz for digital. All products are designed and
    manufactured according to ISO 9001 standards.

  • Dry gases option: The input port is limited to non-corrosive, non-ionic media (e.g., dry air, gases) and should not be
    exposed to condensation. The gases are limited to media compatible with high temperature polyamide, silicone,
    alumina ceramic, silicon, gold, and glass.
  • Liquid media option: Includes an additional silicone-based
    gel coating to protect the electronics under port P1, which
    enables use with non-corrosive liquids (e.g. water and
    saline) and in applications where condensation can occur.
    Since port P2 is designed for use with non-corrosive liquids,
    this option is often suitable for wet-wet differential sensing.

Value to Customers

  • Simplifies design-in: Small size saves room on the PC board
    (PCB), or simplifies design in smaller and lower power
    devices. Meets Moisture Sensitivity Level 1 requirements,
    which allows for unlimited shelf life when stored at
    <30 ºC/85 %RH and, under most storage conditions, allows
    for PCB soldering without any material concern about solder
    joint quality due to aging of the sensor terminals, which
    minimizes the concern about aging of the terminals prior
    PCB assembly. Pressure choices allow engineers to select
    range required for their application. Leadless SMT, SMT, and
    DIP package options.

  • Cost-effective: Small size helps engineers reduce design
    and manufacturing costs while maintaining enhanced
    performance and reliability of the systems they design.
  • Accurate: Total Error Band (TEB) and wide pressure range
    enable engineers to optimize system performance by
    improving resolution and system accuracy. Optional internal
    diagnostics validate that the sensor readings are correct.
  • Flexible: Supply voltage range, variety of pressure units,
    types, and ranges, output options, and wide operating
    temperature range simplify use in the application.
  • Versatile: Wet-media compatibility, sleep mode, and
    temperature output options make the sensor a versatile
    choice for Internet of Things applications.
  • Honeywell Brand: Utilize proprietary Honeywell technology,
    and are protected by multiple global patents.


  • Enhanced accuracy helps the design engineer fully understand the error in measurement.
  • Wide supply voltage range offers design flexibility.
  • Power consumption when utilizing sleep mode option allows for use in battery-powered applications.
Request now


Produkt Merkmale


  • Measure gage and differential pressures
  • Total Error Band: ±1.5 %FSS
  • Liquid media option: Allows for wet/wet operation on dual ported devices
  • Industry-leading long-term stability: ±0.25 %FSS
  • Industry-leading accuracy: ±0.25 %FSS BFSL
  • Wide pressure range: 60 mbar to 10 bar | 6 kPa to 1 MPa | 1 psi to 150 psi
  • As small as 8 mm x 7 mm
  • High burst pressures
  • Calibrated over temperature range of 0°C to 50°C [32°F to 122°F]
  • Operates from a single power supply of either 3.3 Vdc or 5.0 Vdc
  • Output: Ratiometric analog or I2C- or SPI-compatible 12-bit digital
  • Power consumption: 2 uA typical when utilizing sleep mode option
  • Meet IPC/JEDEC J-STD-020D.1 Moisture Sensitivity Level 1 requirements
  • REACH and RoHS compliant
  • Options: Internal diagnostic function, liquid media, sleep mode, temperature output



  • CPAP
  • Blood analysis
  • Blood pressure monitoring
  • Breast pumps
  • Drug dosing
  • Hospital beds
  • Massage machines
  • Oxygen concentrators
  • Patient monitoring
  • Sleep apnea equipment
  • Urine analyzers
  • Ventilators, portable ventilators
  • Wound therapy


  • Air brakes
  • HVAC/transmitters
  • Life sciences
  • Material handling
  • Pneumatic control
  • Pneumatic regulation
  • Process gas monitoring
  • Valve positioning and positioners


  • Air beds
  • Coffee makers
  • Washing machines

Technische Daten

Series Name
Basic ABP
Measurement Type
Signal Conditioning
Temperature Compensation
Pressure Range
0 psi to 1 psi
Supply Voltage
3.3 Vdc typ.
Supply Current
3.1 mA typ.
Transfer Function
214 counts, no temperature output, no sleep mode
Digital I2C address: 0x28
Response Time
0.46 ms
Port Style
AN: single axial barbed port
Package Type
Total Error Band
±1.5 %FSS
Accuracy (Best Fit Straight Line)
±0.25 %FSS
100 g, 6 ms duration
15 g, 10 Hz to 2 kHz
Operating Temperature
-40°C to 85°C [-40°F to 185°F]
Compensated Temperature Range
0°C to 50°C [32°F to 122°F]
Storage Temperature
-40°C to 85°C [-40°F to 185°F]
UNSPSC Commodity
41111927 Pressure Sensors
1 million pressure cycles min.


We are happy to help you!

Inquire now

Our partners

Office south Austria

Kalsdorfer Straße 26 a
8073 Feldkirchen bei Graz

Tel:    +43 316 40 33 01

Office north Austria

Aisttalstraße 3
4311 Schwertberg

Tel:    +43 7262 61700

Everywhere available