TruStability™ SSC Series

Sensorwell

TruStability™ SSC Series

Pressure Ranges

  • ±1.6 mbar to ±10 bar | ±160 Pa to ±1 MPa | ±0.5 inH20 to ±150 psi

The TruStability® Standard Accuracy Silicon Ceramic (SSC) Series is a piezoresistive silicon pressure sensor offering a ratiometric analog or digital output for reading pressure over the specified full scale pressure span and temperature range.

The SSC Series is fully calibrated and temperature compensated for sensor offset, sensitivity, temperature effects, and nonlinearity using an on-board Application Specific Integrated Circuit (ASIC). Calibrated output values for pressure are updated at approximately 1 kHz for analog and 2 kHz for digital.

The SSC Series is calibrated over the temperature range of -20 °C to 85 °C [-4 °F to 185 °F]. The sensor is characterized for operation from a single power supply of either 3.3 Vdc or 5.0 Vdc.

These sensors measure absolute, gage, or differential pressures. The absolute versions have an internal vacuum reference and an output value proportional to absolute pressure. Gage versions are referenced to atmospheric pressure and provide an output proportional to pressure variations from atmosphere. Differential versions allow measurement of pressure between two pressure ports.

The TruStability® pressure sensors are intended for use with non-corrosive, non-ionic gases, such as air and other dry gases. Available options extend the performance of these sensors to non-corrosive, non-ionic liquids for pressure ranges above 40 mbar | 4 kPa | 20 inH2O.

All products are designed and manufactured according to ISO 9001 Standards.

Request now

TruStability™ SSC Series

Products

SSCSNBN005NGAA5

TruStability™ SSC Series, analog, DIP NB: fastener mount, dual axial ports, same side, gage, 0 inH2O to 12 inH2O, 5.0 Vdc

The TruStability™ Standard Accuracy Silicon…

SSCDANN010NG2A3

TruStability™ SSC Series-Standard Accuracy, digital I²C address: 0x28, DIP AN: single axial barbed port, gage, 0 inH2O to 10 inH2O, 3.3 Vdc, no special options

The…

SSCDRRN020NDAA5

TruStability™ SSC Series-Standard Accuracy, analog, DIP RR: dual radial barbed ports, same side, differential, ±20 inH2O, 5.0 Vdc, no special options

The TruStability™ Standard Accuracy Silicon…

SSCDANN020NG2A3

TruStability™ SSC Series-Standard Accuracy, digital I²C address: 0x28, DIP AN: single axial barbed port, gage, 0 inH2O to 12 inH2O, 3.3 Vdc, no special options

The…

SSCDRRN025MDAA3

TruStability™ SSC Series-Standard Accuracy, analog, DIP RR: dual radial barbed ports, same side, differential, ±25 mbar, 3.3 Vdc, no special options

The TruStability™ Standard Accuracy Silicon…

SSCDLNN040MGSA5

TruStability™ SSC Series-Standard Accuracy, digtital SPI, DIP LN: single axial barbless port, gage, 0 mbar to 40 mbar, 5.0 Vdc, no special options

The TruStability™ Standard…

Downloads

We are happy to help you!

Inquire now

Our partners

Office south Austria

Kalsdorfer Straße 26 a
8073 Feldkirchen bei Graz
Austria

Tel:    +43 316 40 33 01
Mail:  office@sensorwell.at

Office north Austria

Aisttalstraße 3
4311 Schwertberg
Austria

Tel:    +43 7262 61700
Mail:  office@sensorwell.at

Everywhere available