Model TJE General Purpose, Gage/Absolute Pressure Transducer; 0.5 psig/a to 60,000 psig/a; 17-4 PH Stainless Steel, Wetted Material For Ranges Up to 2,000 psi and 15-5 PH Stainless Steel, Wetted Material For Ranges 2,000 psi and Greater; Hermetically Sealed; 0.10 % Accuracy; Intrinsically Safe Available
The Model TJE pressure transducers are sensors manufactured out of 17-4 PH stainless steel, wetted material for ranges up to 2,000 psi and 15-5 PH stainless steel, wetted material for ranges 2,000 psi and greater. These pressure transducers are built for rugged, industrial applications that require high accuracy and measurement stability. The Model TJE is available with a variety of options for extended temperature operation, electrical terminations, wetted material and high-level outputs including 5 Vdc or 10 Vdc and 4 mA to 20 mA. Most high-level output models have internal shunt calibration circuits as a standard feature to allow easy setup of the sensor to the data system. An optional internal signature calibration chip provides calibration information for automatic setup with the Model SC four-or-twelve channel digital indicator. The Model TJE is a strain gauge-based transducer and features a unique “true gage” design that uses a second-welded, stainless steel diaphragm, which hermetically seals the strain gauge circuitry from atmospheric contamination. This design references the primary pressure sensing diaphragm to the atmosphere and provides a stable zero regardless of the transducer environment. The absolute Model TJE has an all-welded, vacuum reference chamber ensuring long-term stability.

Request now


Produkt Merkmale


  • 0.1 % accuracy
  • 0.0025 % F.S./°F temperature effect
  • 1 psig/a to 60000 psig/a range
  • mV/V, 4 mA to 20 mA, 0 Vdc to 5 Vdc, or 0 Vdc to 10 Vdc output
  • All-welded, stainless steel construction
  • Intrinsically safe available (2N option only)
  • CE approved


  • Engine and transmission test stands
  • Fluid pump pressure
  • Fuel line pressure and fuel/air ratio
  • Brake assembly test
  • Air bag system fill pressure
  • Pressure brake testing, hydraulic sensor: brake pedal forces, ABS pressures
  • Hydraulic and pneumatic system monitoring

Technische Daten

Form Factor
General Process; Foil - Pressure
Pressure Range
1,000 psi
Pressure Unit
±0.10 %FS BFSL
±0.10 %FS
±0.05 %FS
mV/V 4 mA to 20 mA 0 Vdc to 5 Vdc 0 Vdc to 10 Vdc
5-point calibration: 0 %, 50 %, and 100 % of full scale
Gases, liquids compatible with wetted parts
Temperature (Operating)
-100 °F to 325 °F up to 1000 psi -100°F to 250°F 1500psi and above
Temperature (Compensated)
15 °C to 71 °C [60 °F to 160 °F]
Temperature Effect (Zero)
0.0025 %FS/°F
Temperature Effect (Span)
0.0025 %reading/°F
Hermetically sealed IP68/NEMA 6P
Electrical Termination (std)
PTIH-10-6P or equiv. (hermetic stainless)
Mating Connector
PT06A-10-6S or equiv. (AA111)
Strain Gage Type
Bonded foil
Insulation Resistance
5000 mOhm @ 50 Vdc
Bridge Resistance
350 Ohm
Shunt Calibration Data
Overload (safe)
<15k 50% 20 to 60k 25%
Overload (burst)
< 5k psi 300%, 7.5k psi to 10k psi 200%, 15k psi to 60k psi 70%
Wetted Parts Material
17-4 PH Stainless Steel (<2000 psi); 15-5 PH Stainless Steel (>/=2000 psi)
Case Material
304 Stainless Steel
Intrinsically Safe Option
2N option only
10 oz
Pressure Port
1/4-18 NPT male
Product Dimensions
Ø38 mm x 51 mm L [Ø1.5 in x 2.02 in L]
Agency Approvals and Standards
CE approved
UNSPSC Commodity
41112110 Pressure Transducer
Series Name

We are happy to help you!

Inquire now

Our partners

Office south Austria

Kalsdorfer Straße 26 a
8073 Feldkirchen bei Graz

Tel:    +43 316 40 33 01

Office north Austria

Aisttalstraße 3
4311 Schwertberg

Tel:    +43 7262 61700

Everywhere available