“Gamma System” pressure-sensitive edges are used to eliminate the risk of crashing or shearing associated with the operation of sliding doors, movable bulkheads, automated movable guards, electric doors, etc…Pressure-sensitive edges consist of an aluminium support channel section (C-shape) and a PVC section into which the safety sensor is housed. The safety sensor consists of two conductive reeds which are kept separate one from another by means of a non conductive part; reeds come into contact when the PVC section undergoes deformation. The pressure-sensitive edges are fitted with an auto-check module which verifies the continuity of connections and transforms the NO contact of the edge into an NC safety contact.
“Gamma System” pressure-sensitive edges consist of the following parts:
• Aluminium support channel (“C” shape). The C-shaped section may also be arranged with angle section (“L” shape) for vertical mounting orientation and with “I” iron for horizontal mounting orientation, sideways the edge.
• The PVC section can be supplied in 4 different configurations: Type B0, Type B1N, Type B2N, Type B2
• Power cable length on request in accordance with EN ISO 13856-2 and EN 13849-1; EN 12978 for motorized doors and gates.
|
|
TECHNICAL FEATURES |
Type B0
|
Type B1N
|
Type B2
|
Type B2N
|
Operating distance |
3 mm |
5 mm |
5 mm |
5 mm |
Extra-run operation |
2 mm |
20 mm |
8 mm |
10 mm |
Operating thrust |
3 kg |
3 kg |
3 kg |
1 kg |
Material |
EPDM |
PVC |
EPDM |
PVC |
Length |
Upon request max 15 m |
Upon request max 6 m |
Fastening material |
Bi-adhesive |
Support of aluminium |
Chemical resistance |
Acids, atmospheric agents |
Oil, hydrocarb., diesel |
Acids, atmospheric agents |
Oil, hydrocarb., diesel |
Protection degree |
IP64 |
Operating temperature |
-10°C a +50°C |
Max. contact voltage |
30 V |
Max. contact current |
30 mA |
Reference standard Safety category |
Tests according to EN ISO 13856-2 Cat. 3 PL e combined with control units type GP02/E and GP02R.T |
CONDUCTIVE SENSITIVE EDGE 8,2 kΩ RESISTANCE
|
|
Conductive sensitive type “B1NC” and B2C” feature a thermoplastic type with two co extruded parts of conductive material (sensor) and two copper wires to stabilize the resistive value of the contact on the whole length of the edge. Particularly suitable for outside use, in any environment and temperature range (-15°C to +55°C), it can be supplied as a “do it yourself” solution with a series of accessories allowing to the customer/installer to implement the edge directly on the machine.
Sensitive edges GAMMA SYSTEM feature as well a channel section mounting in aluminium “C”. Iron mounting “I” and angle section ”L” can be added to enable respectively horizontal and vertical fixing. In accordance with EN ISO 13856-2 and EN ISO 13849-1; EN 12978 for motorized doors and edges.
|
|
TECHNICAL FEATURES |
Type B1NC H=40mm
|
Type B2C H=25mm
|
Operating distance |
5.05 mm |
5 ,40mm |
Extra-run operation |
16 mm ø80 250N
18 mm ø80 400N |
3 mm ø80 250N 4 mm ø80 400N |
Operating thrust |
146 N (-15°C) |
84 N (-15°C) |
Material |
TPV black |
Length |
Solution assembled max. 6 m
or roll of 25 m |
Solution assembled max. 6 m or roll of 25m |
Weight kg/m |
0,6 |
0,4 |
Fastening material |
Profile of aluminium L = 6 m |
Chemical resistance |
Acid, alkali, abrasion,
atmospheric agents |
Protection degree |
IP65 |
Operat. temperature |
-15°C +55°C |
Max. contact voltage |
30 V |
Mac. contact current |
30 mA |
Reference standard Safety category |
Test according to EN ISO 13856-2 and UNI12978 for motorized gates
Cat. 3 PL e combined with control unit type GP02R and GP02R-C |
|