Sensorwell

060-0761-29ZG

Model Z General Purpose, Gage/Absolute Pressure Transducer; 0.5 psig/a to 60,000 psig/a; 17-4 PH Stainless Steel, Wetted Material For Ranges Up to 2,000 psi and 15-5 PH Stainless Steel, Wetted Material For Ranges 2,000 psi and Greater; Hermetically Sealed; 0.25 % Accuracy; Intrinsically Safe Available
The Model Z pressure transducers are sensors manufactured out of 17-4 PH stainless steel, wetted material for ranges up to 2,000 psi, 15-5 PH stainless steel, wetted material for ranges 2,000 psi and greater. These pressure transducers are built for rugged, industrial applications that require high accuracy and measurement stability. Pressure ranges span from 0.5 psi to 60,000 psi. They utilize complete four-arm 350 ohm strain gauge bridges. The Model Z is available with a variety of options for extended temperature operation, electrical terminations, wetted material and high-level outputs including 5 Vdc or 10 Vdc and 4 mA to 20 mA. Most high-level output models have internal shunt calibration circuits as a standard feature to allow easy setup of the sensor to the data system. An optional internal signature calibration chip provides calibration information for automatic setup with the Model SC four-or-twelve channel digital indicator. The Model Z is a strain gauge-based transducer. This design references the primary pressure sensing diaphragm to the atmosphere and provides a stable zero regardless of the transducer environment. The absolute Model Z has an all-welded, vacuum reference chamber ensuring long-term stability.

Jetzt anfragen!

060-0761-29ZG

Produkt Merkmale

Kenndaten

  • 0.25 % accuracy
  • 0.005 % F.S./°F temperature effect
  • 0.5 psig/a to 60000 psig/a range
  • mV/V, 4 mA to 20 mA, 0 Vdc to 5 Vdc, or 0 Vdc to 10 Vdc available outputs
  • All-welded, stainless steel construction
  • Intrinsically safe available (2N option only)16
  • CE approved

Anwendungsbereiche

  • Engine and transmission test stands
  • Fluid pump pressure
  • Fuel line pressure and fuel/air ratio
  • Brake assembly test
  • Tire manufacturing mold pressure control
  • Brake and Accelerometer cable test
  • Air bag system fill pressure
  • Pressure brake testing, hydraulic sensor: Brake pedal forces, ABS pressures
  • Well stimulation
  • Coil tubing
  • MWD
  • Wellhead measurement

Technische Daten

Form Factor
General Process; Foil - Pressure
Pressure Range
1,000 psi
Pressure Unit
Gage
Accuracy
±0.25 %FS
Linearity
±0.15 %FS
Hysteresis
±0.10 %FS
Output
mV/V 4 mA to 20 mA 0 Vdc to 5 Vdc 0 Vdc to 10 Vdc
Resolution
Infinite
Calibration
5-point calibration: 0 %, 50 %, and 100 % of full scale
Media
Gases, liquids compatible with wetted parts
Temperature (Operating)
-100 °F to 325 °F up to 1000 psi -100°F to 250°F 1500psi and above
Temperature (Compensated)
15 °C to 71 °C [60 °F to 160 °F]
Temperature Effect (Zero)
0.005 %FS/°F
Temperature Effect (Span)
0.005 %reading/°F
Electrical Termination (std)
PTIH-10-6P or equiv. (hermetic stainless)
Mating Connector
PT06A-10-6S or equiv. (AA111)
Strain Gage Type
Bonded foil
Insulation Resistance
5000 mOhm @ 50 Vdc
Bridge Resistance
350 Ohm
Shunt Calibration Data
Included
Overload (safe)
50 % over capacity
Overload (burst)
<5k psi 300 %, 7.5k psi to 10k psi 200 %, 15k psi to 30k psi 70 %
Wetted Parts Material
17-4 PH Stainless Steel (<2000 psi); 15-5 PH Stainless Steel (>/=2000 psi)
Case Material
304 Stainless Steel
Weight
10 oz
Pressure Port
1/4-18 NPT male
Product Dimensions
Ø38,1 mm x 60 mm [Ø1.5 in x 2.35 in L]
Agency Approvals and Standards
CE approved
UNSPSC Code
41112110
UNSPSC Commodity
41112110 Pressure Transducer
Availability
Global
Series Name
Z

Wir sind gerne für Sie da!

Jetzt kontaktieren

Unsere Partner

Kalsdorfer Straße 26 a
8073 Feldkirchen bei Graz
Österreich

Tel:    +43 316 40 33 01
Mail:  office@sensorwell.at