Sensorwell

MPRLL0025PA00001A

MicroPressure MPR Series, compensated/amplified, absolut, leadless SMT long port, with silicone gel, 0 mmHg to 300 mmHg, 24-bit digital I²C address: 0x18 output, 2.5% to 22.5% of 2²⁴ counts transfer function

• 60 mbar to 2.5 bar | 6 kPa to 250 kPa | 1 psi to 30 psi

Description

The MPR Series is a very small piezoresistive silicon pressure sensor offering a digital output for reading pressure over the specified full scale pressure span and temperature range. It is calibrated and compensated over a specific temperature range for sensor offset, sensitivity, temperature effects, and non-linearity using an on-board Application Specific Integrated Circuit (ASIC).  This product is designed to meet the requirements of higher volume medical (consumer and non-consumer) devices, commercial appliance, and industrial/HVAC applications

Value to Customers

• Very small form factor: Enables portability by addressing weight, size, and space restrictions; occupies less area on the PCB.
• Wide pressure ranges simplify use.
• Enhances performance: Output accelerates performance through reduced conversion requirements and direct interface to microprocessors.
• Value Solution: Cost-effective, high volume solution with configurable options.
• Long port version meets IPC/JEDEC J-STD-020D.1 Moisture Sensitivity Level 1 requirements: Allows avoidance of thermal and mechanical damage during solder reflow attachment and/or repair that lesser rated sensors may incur; allows unlimited floor life when stored as specified (simplifying storage and reducing scrap); eliminates lengthy bakes prior to reflow, and allows for lean manufacturing due to stability and usability shortly after reflow.

Differentiation:

• Application-specific design addresses specific application needs and challenges.
• Digital output: Plug and play feature enables ease of implementation and system level connectivity.
• Total Error Band: Provides true performance over the compensated temperature range, which minimizes the need to test and calibrate every sensor, thereby potentially reducing manufacturing cost; improves sensor accuracy and offers ease of sensor interchangeability due to minimal part-to-part variation.