Sensorwell
HRS100SWAB090
HRS100 Series Hall-effect rotary position sensor, slotted shaft, flying wire leads, 90° electrical angle
The HRS100 Series uses Hall-effect technology to provide angular position information. The use of magnetically coupled information, in place of a mechanical wiper assembly, provides long life and a cost-effective solution for harsh environments that include temperature, vibration, dither, moisture and dirt.
The HRS100 Series is packaged in a metal housing with a 9,5 mm [0.375 in] diameter bushing and a 6,35 mm [0.25 in] diameter slotted shaft. Termination is either solder lug or flying wire leads.
HRS100SWAB090
Produkt Merkmale
Kenndaten
- Solid-state Hall-effect technology: Provides non-contact operation, long service life, low torque actuation and reduces worn-out mechanisms
- Choice of termination: Provides application flexibility
- 10 M cycle product life (typical): Provides long life in the application
Anwendungsbereiche
Transportation:
- Position and movement detection of pedals, throttles, gear shift, levers, steering, linkages, and hitches (off-road vehicles and industrial/ construction/agricultural vehicles/equipment)
- Tilt/trim position (boat engines)
Industrial:
- Material handling equipment (forklifts, robotics)
Technische Daten
Product
HRS100SWAB090
Package Type
stainless steel shaft and brass bushing
Supply Voltage
5 Vdc ± 10%
Output Type
sink/source 2 mA
Termination Type
flying wire leads
Operating Temperature
-40 °C to 85 °C [-40 °F to 185 °F]
Storage Temperature
105 °C [221 °F] max.
Output Voltage
5 % to 95 % of applied Vdd, approx (programmable)
Linearity (% of Span)
± 2%
Mechanical Angle of Rotation
90 ° ±2°
Output Current (max.)
2 mA max.
Bushing Type
9.52 mm [0.375 in] FMS, excludes C-ring
Rotational Cycles
10 million
Rotational Torque
0.014 N m [2.0 in oz] (max. at 25 °C)
Stop Torque
0.56 N m [5 in lb]
Push Out
9.1 kg [20 lb] min.
Pull Out
4.5 kg [10 lb] min.
Overvoltage Protection
18 Vdc max.
EMI
30 V/m, 10 kHz to 1000 MHz at 3 m
Series Name
HRS100
[*Product_Applications*]
Transportation:
- Position and movement detection of pedals, throttles, gear shift, levers, steering, linkages, and hitches (off-road vehicles and industrial/ construction/agricultural vehicles/equipment)
- Tilt/trim position (boat engines)
Industrial:
- Material handling equipment (forklifts, robotics)
[*Product_Features*]
- Solid-state Hall-effect technology: Provides non-contact operation, long service life, low torque actuation and reduces worn-out mechanisms
- Choice of termination: Provides application flexibility
- 10 M cycle product life (typical): Provides long life in the application
