Sensorwell

MT-4RL

MICRO SWITCH MT Series Standard Basic Switch, Single Pole Double Throw Circuitry, 10 A at 125 Vdc/Vac (non-polarized), Flexible Leaf Actuator, 3,34 N [12 oz] Maximum Operating Force, Silver Contacts, Solder Termination, CSA, UL
MICRO SWITCH MT Series magnetic blow-out switches are designed to switch high-capacity (125 Vdc/250 Vdc) electrical loads. An integral magnet around the contact gap deflects the arc away from the contacts, extending switch life. Vents between the cover and housing allow the hot gas to escape.

Jetzt anfragen!

MT-4RL

Produkt Merkmale

Kenndaten

  • Mounting interchangeability with BZ/BA switches
  • Rated for 10 A resistive at 125 Vac/Vdc and 3 A resistive at 250 Vdc
  • Mechanical life of 100,000 cycles at 95% survival
  • Arc-extinguishing design in contact area
  • Arc-resistant case

Anwendungsbereiche

  • DC motors
  • Solenoids

Technische Daten

Switch Type
MICRO SWITCH Standard 25,4 mm H x 17,8 mm W x 50,8 mm L [1.0 in H x 0.7 in W x 2.0 in L]
Ampere Rating
10 A
Sealed
No
Circuitry
SPDT
Actuator
Flexible Leaf
Termination
Solder
Operating Temperature
-55 °C to 82 °C [-67 °F to 180 °F]
Voltage
125 Vac/125 Vdc
Actuator Length
49,49 mm [1.95 in]
Contact Type
Silver
Operating Force (OF)
3,34 N [12 oz] max.
Release Force
0,28 N [1.0 oz] min.
Overtravel (OT)
1,52 mm [0.060 in] min.
Operating Position (OP)
19,1 mm ±0,76 mm [0.75 in ± 0.03 in]
Housing Material
Arc Resistant Melamine
Agency Approvals and Standards
UL, CSA
Mounting Screw Size
3,53 mm [0.139 in]
Mounting Centers
25,4 mm [1 in]
Weight
27,2 g [0.060 lb]
Package Height
24,1 mm [0.95 in]
Package Width
17,5 mm [0.69 in]
Package Length
49,3 mm [1.94 in]
Recommended For
For best results, either polarize the switch with common terminal being of negative polarity or mount the switch with brass screws and space at least 0.250 in from magnetic materials.
Availability
Global
Series Name
MT

Wir sind gerne für Sie da!

Jetzt kontaktieren

Unsere Partner

Kalsdorfer Straße 26 a
8073 Feldkirchen bei Graz
Österreich

Tel:    +43 316 40 33 01
Mail:  office@sensorwell.at