Sensorwell
HPR05750PHKSNCAA01
HP Series High Pressure Switch, rising set point (factory set), 575 psi, 1/2-14 NPT port, SPDT-NO/NC output with gold-inlay contacts, cold-rolled steel base, petroleum-based hydraulic fluid actuation, Deutsch DT04-3P-E005 (three-pin connector)
These pressure switches are durable, reliable electromechanical gauge pressure on/off switches that are available with either single pole single throw (SPST) normally open or normally closed circuitry, or single pole double throw (SPDT) circuitry. Their high proof pressure and burst pressure ratings allow for use in many rugged applications that require the making or breaking of an electrical connection in response to a pressure change of the system media.
Technische Daten
Operating Pressure
575 psi
Product Type
Pressure Switch
Connector(s)
3/4-16 UNF
Contact Setting Range
100 psi to 4500 psi
Standard Factory Set Points
100 psi to 4500 psi
Electrical Termination
Deutsch DT04-3P-E005 (3-pin connector)
Circuitry
SPDT (NO/NC)
Contact(s)
gold-inlay
Proof Pressure
10000 psi (base style A); 6000 psi (base style B)
Burst Pressure
20000 psi (base style A); 9000 psi (base style B)
Resistive Ratings
5 A at 250 Vac, 5 A at 24 Vdc
Inductive Ratings
5 A at 115 Vac (SX rating), 3 A at 28 Vdc
Standard Seal
IP67 (Base style A); IP69K (Base style B)
Diaphragm
Nitrile O-ring (steel piston)
Temperature
-40 °C to 120 °C [-40 °F to 248 °F]
Base
Cold-rolled steel
Hysteresis
5 % to 55 % (based on set point range)
Availability
Global
Series Name
HP
