Sensorwell
MHF00850MBPNNAAA
MH Series Medium Pressure Switch, falling set point (factory set), 8,5 bar true gage, 1/8-27 NPT port, SPST-NO output with gold-plated contacts, cold-rolled steel base, HNBR diaphragm, and 1/4 inch spade terminals
These pressure switches are durable, reliable electromechanical gauge pressure on/off switches that are available with either single pole single throw (SPST) normally open or normally closed circuitry, or single pole double throw (SPDT) circuitry. Their high proof pressure and burst pressure ratings allow for use in many rugged applications that require the making or breaking of an electrical connection in response to a pressure change of the system media.
Technische Daten
Operating Pressure
8,5 bar, true gage
Product Type
Pressure Switch
Connector(s)
1/8-27 NPT
Contact Setting Range
40 psi to 500 psi
Standard Factory Set Points
4
Electrical Termination
1/4 in spade terminals
Circuitry
SPST-NO
Contact(s)
gold-plated
Proof Pressure
6000 psi
Burst Pressure
9000 psi
Resistive Ratings
100 mA to 3 mA max.
Inductive Ratings
n/a
Standard Seal
IP67 (connectors); IP00 (blade/screw)
Diaphragm
HNBR diaphragm (Hydrogenated Nitrile Butadiene Rubber)
Temperature
-40 °C to 120 °C [-40 °F to 248 °F]
Base
Cold-rolled steel
Hex Size
27 mm
Snap-action Switch
no
Set Point Accuracy
±7 psi
Average Deadband
±6 psi
Hysteresis
n/a
Field Adjustability
Factory set, not adjustable
Spike Dampening
no
Availability
Global
Series Name
MH
